
( Brand: Singlestream ), ( Manufacturer Part Number: SS-2206BT-BT ), ( Part Type: Tap System )
The SS-2206BT-BT SingleStream Datacom 10-100-1000 Link Aggregation Tap is a versatile network monitoring solution designed for high-performance environments. This device allows you to monitor and aggregate multiple Gigabit Ethernet links, providing real-time network traffic analysis and ensuring uninterrupted network performance.
The SS-2206BT-BT is built with a SingleStream technology, which means it supports full-duplex data transfer on all ports, ensuring optimal network efficiency and reducing the risk of data bottlenecks. It is capable of link aggregation, enabling you to bundle multiple ports into a single logical link for increased bandwidth and improved network resilience.
This tap supports speeds of 10, 100, and 1000 Mbps on each port, making it suitable for a wide range of network environments. It is designed with a compact form factor, making it easy to install and space-efficient in your network infrastructure.
The SS-2206BT-BT is equipped with advanced features such as Jumbo Frame support (up to 9K), IEEE 802.1Q VLAN tagging, and various link modes, including static, dynamic, and on-demand link aggregation. It also offers flexible port configuration, allowing you to customize the device to meet your specific network requirements.
With its robust design, high-speed data handling capabilities, and advanced link aggregation features, the SS-2206BT-BT SingleStream Datacom 10-100-1000 Link Aggregation Tap is an ideal choice for network administrators seeking to optimize their network performance and ensure uninterrupted data flow.
The SS-2206BT-BT SingleStream Datacom 10/100/1000 Link Aggregation Tap is a networking device designed for monitoring network traffic. Here are some pros and cons to consider:
Pros:1. Link Aggregation: The device supports link aggregation, allowing multiple network ports to be combined for increased bandwidth and redundancy. This can be particularly useful in high-traffic environments.
2. Full-Duplex Operation: The SS-2206BT-BT supports full-duplex operation, meaning it can transmit and receive data simultaneously, improving network efficiency.
3. Jumbo Frame Support: The device supports jumbo frames, allowing larger data packets to be transmitted, which can improve network performance in certain situations.
4. Non-Intrusive: As a tap, it does not insert itself into the data stream, making it a non-intrusive monitoring solution.
5. Easy Setup: The device is reported to be easy to set up and use.
Cons:1. Cost: The SS-2206BT-BT is a more expensive solution compared to a simple network hub or switch. The cost may not be justifiable for small networks or those with low traffic.
2. Passive Device: As a tap, it does not have the ability to forward or process network traffic, which could potentially be a disadvantage in some situations.
3. Limited Port Count: With only two ports, it may not be suitable for networks that require monitoring of more than two links.
In conclusion, the SS-2206BT-BT SingleStream Datacom 10/100/1000 Link Aggregation Tap is a high-quality network monitoring solution, particularly for high-traffic environments where link aggregation and full-duplex operation are beneficial. However, the high cost and limited port count may make it less suitable for smaller networks or those with lower traffic requirements.
Recommendation: If you are looking for a non-intrusive, high-performance network monitoring solution for a high-traffic environment and budget is not a concern, the SS-2206BT-BT could be a good choice. If you have a smaller network or are looking to monitor fewer links, you may want to consider a less expensive option.
Not all monitoring devices have that capability. Analyzer, ids, probe in two separate half-duplex streams. 79 x cm weight While traditional network taps might enable full-duplex monitoring of all traffic on a link, they transmit the data to device e.
7 kegs operating temperature to 40 c storage 65 humidity 5 90 non-condensing. Manage tap via management port or local serial any-to-any architecture can send traffic to any from other port, eliminating the need for network managers change complex configurations of span ports move tools around their. The 2200 series Singlestream dual link aggregation tap faultlessly combines four data streams, allowing any connected monitoring device to receive a full-duplex stream of with one Nick x 17.
The 2200 series Singlestream dual gigabit link aggregation tap from datacom systems provides a superior solution for 24x7 monitoring of Ethernet links. Link protect feature allows the relay fail over circuit to close if either or both sides of link go down any-to-any architecture on 2 ports endues steer traffic as desired in-line design eliminates contention for network access by freeing up span mirror 24x7 point monitoring and security tools specifications connections two rj45 control port db9 female management - 100mbs full-duplex power 100-240vac, 50-60hz.
The Singlestream ss-2200 series configurable dual link aggregation tap provide maximum flexibility allowing a choice of or non-aggregation bi-directional data on single 1000mb.